Tips for washing and energy saving – Smeg 185426 User Manual
Page 24

185426
•
Before washing sort out the laundry according to
the type, degree of dirtiness and color resistance.
•
Prior selecting the washing program consult the
sewn tab with information on a particular piece
of laundry (see
Maintenance chart on the last
page).
•
Wash separately the new colored textile products
for the first time.
•
Wash heavily soiled laundry in small quantities
and add more detergent.
•
Treat stubborn stains with special stain remover, it
will save energy.
•
For lightly stained laundry select washing program
without pre-wash, use quick wash and select
lower washing temperature. This way you may
save up to 50% of energy.
•
Avoid washing too little quantities of laundry
because of energy saving and for better
performances of the appliance.
•
The largest allowed quantity of dry laundry is
indicated in the
Program chart on the last page.
•
Before washing empty the pockets, close zip
fasteners, and remove any metal fasteners or
badges that might clog the drain or damage the
laundry or drum interior.
•
Loosen the stacked laundry prior inserting it into
the drum.
•
Use only detergents for machine wash.
•
Add powder or liquid detergents according to the
manufacturer’s instructions.
•
If water hardness level exceeds 14°dH degrees,
the use of water conditioner is required. Any
damage to the heater due to failure to use a water
conditioning agent shall not be covered by this
warranty.
24
Tips for washing and energy saving