Smeg 185426 - Manual (Page 20)

185426
Drain
Use it when the washing program was interrupted
or if rinse hold function was engaged, and you
only wish to pump the water out of the drum, without
spinning.
Spin
Aggressive spinning for non-delicate laundry at high
spin RPM.
Spin revolutions can be altered.
- Adding washing and softening agents
(see tips for washing and energy saving)
•
pre-wash compartment
•
main wash compartment
•
softener compartment
If you do not apply the program which includes the
pre-wash feature, you may add washing detergent
directly into the drum, using the measuring vessel.
When adding softener, be careful to fill the
dispenser only up to the marked level.
Be sure to close the detergent dispenser
when opening/closing the appliance door.
Program is activated by pushing the START/PAUSE
button (F). Sound signal confirms the start, the
display indicates first washing stage and time
left to the end of washing. Washing stages are
consecutively displayed in accordance with the
selected program.
If the machine is set with the delayed start, it will
start operating after the delay time expires.
If the rinse hold function was set, the program will
stop at the final rinse and the display indicates
flashing sign rinse hold .
You may conclude the program by pressing the
20
Start the operation