Smeg 185426 - Manual (Page 30)

185426
30
Failure Possible cause Remedy
Excessive foaming
during washing.
Excessive measure of
detergent.
Use washing powder according
to the instructions by the
producer and according to the
water hardness and soiled
laundry.
Use only detergents for machine
washing.
Laundry is not
properly spun.
No failure is
reported.
The machine switched on
the UKS* function. Because
of bad laundry balance, the
machine has automatically
reduced spin RPM.
The machine operates normally.
Wash large and small pieces of
laundry together.
Greasy wads
appear on the
laundry.
Too little detergent (laundry
was very greasy).
Wash the laundry again.
Add more detergent for such
soiled laundry, or use liquid
detergent.
Laundry is stained
after washing.
You used liquid detergent or
detergent for colored laundry
which does not contain
whitener. You selected
inappropriate program.
Use the detergent containing
whitener.
Select the heavily soiled laundry
program, or activate soaking
function.
White powdery
residues on the
laundry.
It is not the consequence of
bad rinsing, but because of
neo-phosphate detergents
containing non soluble
components (zeolites) for water
softener. Such substances may
be deposited upon the laundry.
Inappropriately selected
program.
• Immediately rinse the laundry
once again.
• Use liquid detergents which do
not contain zeolites.
• Try removing the residues with
the brush.
• Use program for heavily soiled
laundry, or activate soaking
function.
Detergent residues
in the dispenser.
Low water flow pressure.
Some detergents may stick
to the dispenser rather hard
if it is wet.
• Clean the inlet pipe screen.
• Wipe the dispenser prior
loading detergent.
Softener is not
completely rinsed,
or water is left in
the dispenser dish.
Sucking cover is not correctly
positioned or is clogged.
Clean the dispenser and firmly fix
the cover to its place.