Program selection, 4 presettings programs, Instructions for the user – Smeg ALFA41VEK User Manual

Page 8

Instructions for the User

4.3

Program selection

This oven has 10 different cooking programs, including:
2 preset programs (P1 – P2);
6 user-editable programs for humidified fan-mode cooking (P3 to P8),
1 preheating program with user-editable temperature and start and end
time (P9),
1 "easy" editable program for humidified fan-mode cooking (P10).

The following table shows the parameters for each program.

Uprh

preheating

temperature

Ut °C

cooking

temperature

U Ct

cooking

time

Program

start/end

time

210 °C

minutes

N/A

5,0

240 °C

minutes

N/A

5,0

Editable

N/A

Editable

N/A

Editable

N/A

Editable

N/A

Editable

N/A

Editable

N/A

Editable

N/A

Editable

N/A

P10

Same as edited

Ut°C

Editable

N/A

Editable

4.4

Presettings Programs

The first two program selector knob settings are for the presetting cooking
mode programs.
Use the knob to select one of the preset programs (P1–P2).
The display shows the parameters of the selected program (cooking time;
temperature in degrees Centigrade, program number and steam
percentage in the cooking chamber, e.g.P1).
Press START to confirm the start of the program.
The program starts, performing the preheating stage; the display shows
“PrEh”.
When the preheating is complete, a "BEEP" sounds to indicate that
cooking can start.
Press START to start cooking.
(If START is not pressed after the beep, the temperature is held constant
for about 10 minutes, after which it will start to drop for a period up to a
maximum time of 20 minutes, counted from when the beep sounded. After