Sony VIDEO Plus RDR-HX720 - Manual (Page 48)

48
:
Indicates the setting is being recorded to
the HDD.
:
Indicates the setting is being recorded to
a DVD.
When all of the timer settings do not fit
on the list, the scroll bar appears.
To view the hidden timer settings, press
M/m.
2
Select the timer setting you want to
check/change/cancel, and press
ENTER.
The sub-menu appears.
3
Select one of the options, and press
ENTER.
“Modify”:
Changes the timer setting.
Select an item using
using M/m. Select “OK,” and press
ENTER.
“Erase”:
Erases the timer setting. Select “OK,”
and press ENTER.
“Check Overlap”:
Checks for overlapped settings.
The timer setting without the
mark
has priority over the other settings.
Select “Close” to return to the Timer List.
To change or cancel the setting, repeat
steps 2 and 3 above.
When the timer settings overlap
The programme that starts first has priority
and the second programme starts recording
only after the first programme has finished.
When the recordings start at the same
time
The programme that is set last has priority. In
this example, timer setting B is set after A, so
the first part of timer setting A will not be
recorded.
When the end time of one recording and
the start time of another are the same
After finishing the previous recording, the
other recording may be delayed.
will be cut off