Sony VIDEO Plus RDR-HX720 - Manual (Page 28)

28
4
Press z REC.
Recording starts.
Recording stops automatically after 8
hours of continuous recording or when
the HDD or DVD is full.
To stop recording
Press x REC STOP.
Note that it may take a few seconds for
recorder to stop recording.
To watch another TV programme while
recording
If your TV is connected to the i LINE 1 –
TV jack, set your TV to the TV input using
the TV/DVD button and select the
programme you want to watch. If your TV is
connected to the LINE 2 OUT or
COMPONENT VIDEO OUT jacks, set the
TV to TV input using the TV t button
(page 17).
TV Direct Rec
If you are using the SMARTLINK
connection and the “TV Direct Rec” is set to
“On” (page 92), you can easily record what
you are watching on your TV.
When the TV and the recorder are turned on,
press z REC. The recorder starts recording
what you are watching on your TV.
b Note
If “TV” appears in the front panel display, you
cannot turn off the TV or change the programme
position during TV Direct Rec. To turn off the
function, set “TV Direct Rec” to “Off” in the
“Recording” setup (page 92).
About the Teletext function
Some broadcast systems ensure a Teletext
service* in which the complete programmes
and their data (title, date, programme
position, recording start time etc.) are stored
day by day. When recording a programme,
the recorder automatically takes the
programme name from the Teletext pages
and stores it as the title name. For details, see
“Auto Programme Title Labelling (TV Guide
Page)” on page 85.
Note that the Teletext information will not
appear on your TV screen. To view the
Teletext information on your TV screen,
press TV/DVD on the remote to switch the
input source to your TV (page 17).
* not available in some areas
b Notes
• After pressing z REC, it may take a short while
to start recording.
• You cannot change the recording mode while
recording.
• If there is a power failure, the programme you are
recording may be erased.
• You cannot watch a PAY-TV/Canal Plus
programme while recording another PAY-TV/
Canal Plus programme.
• To use the TV Direct Rec function, you must first
correctly set the recorder’s clock.
You can check the recording information
such as recording time or disc type.
Press DISPLAY during recording.
The recording information appears.
A Disc type/format
B Recording status
C Recording mode
D Recording time
Press DISPLAY to turn off the display.
Checking the disc status while
recording