SUUNTO n6HR - Manual (Page 46)

46
7.4. INSTALLATION
To use your Suunto n6
HR
Training Manager, you need to install the appropriate
Suunto USB drivers, .Net Framework, and the Suunto n6
HR
Training Manager PC
software. The Suunto n6
HR
installation wizard will do this for you.
7.4.1. Installing the Suunto n6
HR
software
1. Make sure your Suunto n6
HR
is not connected to your computer.
2. Insert the Suunto n6
HR
CD-ROM into the drive. The installation prompt window
opens automatically.
3. Select Install Suunto n6
HR
Training Manager.
4. Wait for the installation to begin and follow the installation instructions.
The software components will be installed in the following order:
• Net Framework v 1.1. This will be installed only if it has not been installed in
your system before.
• Suunto n6
HR
Training Manager software. During this installation, you need to
select the synchronization method of the training calendar included in the Suunto
n6
HR
Training Manager. There are two methods available: Synchronizing with
Microsoft Outlook or with your Suunto n6
HR
. For more information on this, see
Section 8.3.2. Calendar synchronization.
• Suunto n6
HR
USB drivers. The installation program will install the drivers if
necessary.
5. After the installation wizard has finished the process, attach your Suunto n6
HR
to
the USB port. The system should recognize the device automatically.
NOTE: If the installation does not automatically start, click Start --> Run and type
D:\cd_menu.exe. (Substitute D for the CD-ROM drive).