SUUNTO n6HR - Manual (Page 19)

19
3.1. RECEIVING THE TIME
When your Suunto n6
HR
receives a broadcast signal, it should automatically receive
the correct time from an atomic clock. This happens even if you have not yet
activated the MSN Direct service. As long as your Suunto n6
HR
keeps on receiving
the signal, you do not need to set the time. The time is accurate to a few thousands of
a second, and it automatically adjusts for daylight saving time and leap years. In
addition, your Suunto n6
HR
automatically switches to different time zones as you
travel from place to place.
NOTE: When you turn on your Suunto n6
HR
, it may take a few minutes to receive the
time from an atomic clock.
If you are in an area where your Suunto n6
HR
cannot receive a signal, you can set the
time manually. You can also change the time display from a 12-hour clock to a 24-
hour clock, and you can override the automatic time zone setting. For more details,
see Chapter 6. Settings.