Setting – Sanyo PLC WXU700A User Manual

Page 59

Setting

Key lock

Security (Key lock and PIN code lock)

PIN code lock

This function locks the top control and remote control

buttons to prevent operation by unauthorized persons.

..... Unlocked.

..... Lock the operation of the top control. To

unlock, use the remote control.

..... Lock the operation of the remote control.

To unlock, use the top control.

If the top control accidentally becomes locked and you do

not have the remote control nearby or there is something

wrong with your remote control, contact the dealer where

you purchased the projector or the service center.

This function allows you to use the Key lock and PIN code

lock function to set the security for the projector operation.

This function prevents the projector from being operated

by unauthorized persons and provides the following

setting options for security.

Off ........... Unlocked.

On1 ......... Enter the PIN code every time turning on

the projector.

On ......... Enter the PIN code to operate the projector

once the power cord is disconnected; as

long as the AC power cord is connected,

the projector can be operated without a

PIN code.

Whenever you change the PIN code lock setting or the

PIN code (the four-digit number), you are required to

enter the PIN code. The "1234" is set as the initial PIN

code at the factory.

If you want to change the PIN code lock setting, Press

the SELECT button and the PIN code dialog box

appears.

Off

PIN code lock

Off