beautypg.com

Remote control, Part names and functions – Sanyo PLC WXU700A User Manual

Page 12

background image

1

Part Names and Functions

NETWORK button

Select the Network input. See the owner's manual of “Network Set-up and

Operation” and owner's manual of "Memory viewer function".

Note:

To ensure safe operation, please observe the

following precautions:

– Do not bend, drop, or expose the remote control to

moisture or heat.

– For cleaning, use a soft dry cloth. Do not apply

benzene, thinner, spray, or any chemical material.

Remote Control


ON/STAND-By button

Turn the projector on or off. (pp.21-23)

HDMI button

Select the HDMI input source. (pp.28,41)

COMPUTER button

Select the COMPUTER input source. (pp.30-31, 41)

PAGE ▲▼ buttons

Scroll back and forth the pages on the screen when giving a presentation. To use

these buttons, connect the projector and your computer with a USB cable. (pp.10,

17)

INFO . button

Operate the information function. (p.63)

D .ZOOM +/- buttons

Zoom in and out the images. (pp.28, 39)

MENU button

Open or close the On-Screen Menu. (p.24)

RESET/ON/ALL-OFF switch

When using the remote control, set this switch to “ON.” Set it to “ALL OFF” for

power saving when it is not used. Slide this switch to “RESET” to initialize the

remote control code or switch Spotlight and Pointer to the Laser pointer function.

(pp.13-14)

IMAGE button

Select the image mode. (pp.29,36,43)

MUTE button

Mute the sound. (p.27)

KEySTONE button

Correct keystone distortion. (pp.26, 49)

Point ▲▼◄► ( VOLUME + / – ) buttons

–Select an item or adjust the value in the On-Screen Menu. (p.24)

–Pan the image in the Digital zoom + mode. (p.39)

–Adjust the volume level. (Point◄►buttons) (p.27)

NO SHOW button

Temporarily turn off the image on the screen. (p.29)

LASER button

– Operate the Laser pointer function. Laser beam is emitted while pressing this

button within 1 minute. When using this laser pointer for more than 1 minute,

release the LASER button and press it again. (p.14)

– Display the Pointer on the screen. (p.14)

L-CLICK button

Act as the left mouse button for wireless mouse

operation. (p.15)

SIGNAL EMISSION indicator

Lights red while the laser beam is being emitted

from the laser light window or a signal is being sent

from the remote control to the projector.

FREEZE button

Freeze the picture on the screen. (p.28)

LAMP button

Select a lamp mode. (pp.28, 58)

P-TIMER button

Operate the P-timer function. (p.29)

R-CLICK button

Act as the right mouse button for wireless mouse operation. (p.15)
SELECT button

– Execute the selected item. (p.24)

– Expand or compress the image in Digital zoom mode. (p.39)

PRESENTATION POINTER button

Move a pointer of the projector or a pointer for wireless mouse operation. (pp.14-15)

AUTO SET/CANCEL button

– Correct vertical keystone distortion and adjust computer display parameters such
as

Fine sync, Total dots, Horizontal and Vertical position

.

(pp.26, 48)

– Display the image in USB thumb drive or return to the menu bar in Memory

Viewer menu.

Refer to the owner's manual of "Memory viewer function".

LASER LIGHT window
A laser beam is emitted from here (p.14).

SCREEN button

Select a screen mode. (pp.29,38-39,46)

VIDEO button

Select the VIDEO input source. (pp.28,40)

PIP button

Operate the Picture In Picture function. (pp.28,55)

WIRED REMOTE jack

Connect the remote control cable(not supplied)

to this jack when using as a wired remote control.

Wireless remote control does not work when the

remote control cable is connected to the projector.