Sanyo PLC WXU700A - Manual (Page 44)

44
Video Input
Image Adjustment
1
Press the Point ◄ button to decrease the contrast; press the
Point ► button to increase the contrast (from 0 to 63).
Press the Point ◄ button to decrease the brightness; press
the Point ► button to increase the brightness (from 0 to 63).
Contrast
Brightness
Press the Point ◄ button to lighten red tone; press the Point
► button to deepen red tone (from 0 to 63).
White balance (Red)
Press the Point ◄ button to lighten green tone; press the
Point ► button to deepen green tone (from 0 to 63).
White balance (Green)
Press the Point ◄ button to lighten blue tone; press the
Point ► button to deepen blue tone (from 0 to 63).
White balance (Blue)
Use the Point ◄► buttons to select the desired Color temp.
level (XLow, Low, Mid or High ).
Color temp .
Press the Point ◄ button decrease the intensity of the color;
press the Point ► button increase the intensity of the color
(from 0 to 63).
Press the Point ◄► buttons to adjust the tint value to get a
proper color balance (from 0 to 63).
Color
Tint
 Note:
• When White balance Red, Green or Blue is adjusted, the Color temp. level will change to User.
• Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p.42).
• When Blackboard(Green) or Colorboard is selected in Image select, Color temp . will change to
Blackboard or Colorboard.
Image adjust Menu
Reset
Store
Selected Image mode
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Image
adjust and then press the Point ► or the SELECT
button.
Use the Point ▲▼ buttons select the desired item
and then press the SELECT button to display the
adjustment dialog box. Use the Point ◄► buttons to
adjust the setting value.
Reset
Store
Use the Point ◄►
buttons to adjust the
setting value.