Sanyo PLC WXU700A - Manual (Page 35)

35
Store
To store the adjusted data, select
Store and then press the
Point ► or the SELECT button. Move the highlight to one of
the Modes 1 to 5 in which you want to store, and then press
the SELECT button.
Mode free
To clear the stored data, select
Mode free and then press
the Point ► or the SELECT button. Move the highlight to the
mode that you want to clear and then press the SELECT
button.
 Note:
• Display area (H/V) cannot be selected when 480i, 575i,
480p, 575p, 70p, 1035i or 1080i is selected in the PC
System Menu (p.32).
• When input computer signal to the projector, PC adjust
will become available.
Reset
To reset the adjusted data, select
Reset and press the
SELECT button. A confirmation box appears and then select
yes. All adjustments will return to their previous figures.
Computer Input
store? Store
Vacant
This mode has stored
parameters.
Values of Total dots, Horizontal,
Vertical, Display area H and
Display area V.
Press SELECT button to
store adjusted data.
Press MENU button
to close this dialog
box.
Mode free
Store