Smeg A31G7IXIA - Manual (Page 31)

67
Instructions for the installer
10.2 Burner and nozzle characteristics table
Burner
R ATED
HEATING
CAPACITY
( K W)
LIQUID GAS – G30/G31 30/37 mbar
Nozzle
diameter
1/100 mm
By-pass
1/100 mm
Reduced
capacity
(W)
Capacity
g/h G30
Capacity
g/h G31
Auxiliary (1) 1.05 50 28 * 30 ** 350 76 75
Semi-rapid (2) 1.75 65 32 * 33 ** 450 127 125
Rapid (3) 2.3 75 42 * 45 ** 800 167 164
Ultra-rapid (4) 3.5 94 63 * 65 ** 1500 254 250
Ultra-rapid (5) 3.9 100 63 * 65 ** 1500 284 278
Fish burner (6) 1.9 68 42 * 45 ** 900 138 136
*/**: the diameters market with * and ** must be respectively fitted onto the taps
marked with * and ** seen in the paragraph"11.1 Adjusting the minimum for city and
natural gas".
Burner
R ATED HEATING
CAPACITY ( K W)
METHANE GAS – G20 20 mbar
Nozzle diameter 1/100
mm
Reduced capacity (W)
Auxiliary (1) 1.05 72 350
Semi-rapid (2) 1.75 97 450
Rapid (3) 2.5 108 800
Ultra-rapid (4) 3.5 133 1500
Ultra-rapid (5) 3.9 135 1500
Fish burner (6) 1.9 94 900
Burner
R ATED HEATING
CAPACITY
(
K
W)
CITY GAS – G110 8 mbar
Nozzle diameter 1/100
mm
Reduced capacity (W)
Auxiliary (1) 1.05 145 350
Semi-rapid (2) 1.75 185 450
Rapid (3) 2.5 230 800
Ultra-rapid (4) 3.5 290 1500
Ultra-rapid (5) 3.8 350 1500
Fish burner (6) 1.9 190 900
To identify the burners on your hob, refer to the drawings in point "4. GET
TO KNOW YOUR APPLIANCE".