Smeg A31G7IXIA - Manual (Page 26)

62
Instructions for the installer
Important: other types of installation are possible if supervised by the
manufacturer.
Important: for fixing this product to the support structure, you are advised
not to use mechanical or electrical screwdrivers and to exert moderate
pressure by hand on the mounting parts.
Important: for fixing the product, use the supplied brackets in all the fixing
points.
If this product is installed over an oven, the oven must have a cooling fan.
Important (only for Ultra-rapid burners (UR3) (5) with raised racks): if
the appliance is mounted on a unit, make sure that a separating shelf is
installed, as shown in the figure.
If the appliance, however, is on an oven installed under the hob, there is no
need to install a separating shelf.
Installation of an oven without a cooling fan underneath the hob is
forbidden.