Woodstock W1828 - Manual (Page 16)

Model W1828 (For Machines Mfg. Since 4/11)
-14-
SE
TU
P
Power Connection
After you have completed all previous setup instructions
and circuit requirements, the machine is ready to be
connected to the power supply.
To avoid unexpected startups or property damage, use
the following steps whenever connecting or disconnecting
the machine.
Connecting Power
1. Turn the machine power switch OFF.
2. Insert the power cord plug into a matching power
supply receptacle. The machine is now connected to
the power source.
Disconnecting Power
1. Turn the machine power switch OFF.
2. Grasp the molded plug and pull it completely out of
the receptacle. Do not pull by the cord as this may
damage the wires inside.
Figure 8. Connecting power.
Figure 9. Disconnecting power.