Samsung Digimax 240 - Manual (Page 76)

76
Setup mode
Starting the SETUP mode
BEEP
A beep will sound when you press the camera button and you can check the camera conditions.
Rotate the mode dial to the SETUP mode, allowing you to set up the basic camera settings.
Selecting the beep sound
1. Turn the camera power on.
2. Select the SETUP mode( ) by rotating the mode dial.
3. [SETUP 1/3] menu will display.
4. Select [BEEP] by pressing the UP( )/ DOWN( ) button.
5. Press the RIGHT( ) button and the sub menu will display.
6. Press the UP( )/ DOWN( ) button and select [ON] or
[OFF]. Press the OK button to confirm the setting.
7. The default is [ON].
SETUP 1/3
BEEP ON
FORMAT
POWER OFF 3 MIN
RESET
CHANGE:
SETUP 1/3
BEEP
OFF
ON
BACK: SET:OK