Samsung Digimax 240 - Manual (Page 38)

38
Recording mode
Using the camera button to adjust the camera
The STILL IMAGE/MOVIE CLIP mode function can be set up by using the camera button.
POWER switch
Used for turning the camera power on / off.
If this camera isn t operated during the specified time(about 60
SEC.), the camera power will be idle(LCD monitor : Off, Mode
dial lamp : Blinking ) automatically.
To use the camera again, press any of the camera buttons
except the power switch.
SHUTTER button
Used for taking images in the RECORDING(STILL IMAGE/
MOVIE CLIP).
Pressing the shutter button down halfway activates the
autofocus and the AF indicator lamp blinks quickly.After
selecting the focus, the AF indicator lamp will illuminate.
While the AF indicator lamp is illuminated, pressing the shutter
button down fully will take the image.