Samsung Digimax 240 - Manual (Page 47)

47
ADV
ANCED
Recording mode
OK button
When the menu is displayed on the LCD monitor, the OK button is used for confirming data that is
changed by using the / / / buttons.
MACRO( ) button
Used for macro shots
Selecting the Macro focus
1. Turn the camera power on.
2. Select the STILL IMAGE mode by rotating the mode dial.
3. Press the Macro button and the Macro indicator will be
displayed on the LCD monitor( ).
4. Point the camera towards the subject and compose the image
by using either the viewfinder or LCD monitor. (When you take
an image at a range closer than 1.5m, it is recommended that
you use the LCD monitor to compose the shot.)
5. Take a picture
NOTICE
Photography range in the macro mode : Wide : 0.1m ~ 0.8m
Tele : 0.4m ~ 0.8m
In the macro mode, the flash is turned to Flash off automatically.