Samsung Digimax 240 - Manual (Page 56)

56
Recording mode
QUICK VIEW
Selecting the quick view function
1. Turn the camera power on.
2. Select the STILL IMAGE mode by rotating the mode dial.
3. Do not turn the LCD monitor off.
4. Press the MENU button to display [STILL IMAGE 1/2] menu
on the LCD monitor.
5. Select [STILL IMAGE 2/2] menu by pressing the RIGHT( )
button.
6. Press the UP( )/ DOWN( ) button and select [QUICK
VIEW].
7. Press the RIGHT( ) button and the sub menu will display.
8. Press the UP( )/ DOWN( ) button and select the desired
sub menu.
9. Press the OK button to confirm the setting.
The default is [ON].
10. Press the MENU button to cancel the menu display.
In STILL IMAGE mode, you can select the quick view menu.
You can briefly review the last image captured.
STILL IMAGE mode
STILL IMAGE 2/2
QUICK VIEW ON
LCD BRIGHTNESS 0
EXIT:MENU CHANGE:
STILL IMAGE mode
STILL IMAGE 2/2
QUICK VIEW
OFF
ON
BACK: SET:OK