Samsung Digimax 240 - Manual (Page 43)

43
ADV
ANCED
Recording mode
FLASH( )/ LEFT( ) button
When the menu is displayed on the LCD monitor, pressing the LEFT( ) button makes the menu
cursor move to the main menu.
When the menu is not displayed on the LCD monitor, the LEFT ( ) button operates as the FLASH
button( ).
Selecting the flash mode
The flash activates only in the STILL IMAGE mode.
1. Do not turn the LCD monitor off.
2. Select the STILL IMAGE mode by rotating the mode dial.
3. Press the FLASH button( ) until the desired FLASH mode
indicator displays on the LCD monitor. Use the correct flash to suit
the environment.
The default of each mode is listed below.
- STILL IMAGE mode : Auto flash
- MOVIE CLIP mode : Flash off(fixed)
Selecting the Auto flash
DOWN( ) button
When the menu is displayed on the LCD monitor, pressing the
DOWN( ) button makes the menu cursor move down.
UP( ) button
When the menu is displayed on the LCD monitor, pressing the UP( ) button makes the menu cursor
move up.