Adv anced play mode, Power switch, Lcd button – Samsung Digimax 240 User Manual
Page 61

61
ADV
ANCED
Play mode
Setting up the play back function by using the camera button
You can set up the PLAY mode function by using the camera buttons.
Power switch
Used for turning the camera power on / off.
If this camera is not in operation during the specified time(about 60 SEC), the camera power will be
idle(LCD monitor : Off, Mode dial lamp : illuminating) automatically.
The camera power will be turned off automatically during periods of inactivity. This is done to reduce
battery drain. The camera can be reactivated by sliding the power switch again.
LCD button
Pressing the LCD button in the PLAY mode will change the display as shown below.
image & full information
Image & additional information
image only
Pressing
the LCD
button
Pressing
the LCD
button
Pressing
the LCD
button
You can view image information(Image size, ISO, Shutter speed, Aperture value, Recording date) in
Ex) SIZE : 1600 X 1200
image size
ISO
: 100
ISO
TV
: 1/30 sec
shutter speed
AV
: F 4.0
aperture value
DATE : 2003/01/10
recording date