Samsung Digimax 240 - Manual (Page 106)

106
Software manual
INFORMATION
After installing the camera driver, you have to restart your PC.
If you connect the camera to the PC before installing the camera driver, the [Found New
Hardware Wizard] will open. In this case, cancel the [Found New Hardware Wizard] and
disconnect the connection. Install the camera driver and connect the camera and PC again.
Should the computer not find the camera driver after installation, please try one or more of
the following measures.
1. Delete the camera driver (p.107~108), and re-install the driver.
2. Refer to FAQ (p.129~130) to check for a possible solution to the problem.
3. If your PC s central processing unit is VIA chip (This is shown in the USB Host Controller),
download the patch file from the Samsung Camera web page.
(http://www.samsungcamera.com)