Sharp MD-MT821 User Manual
Page 42
The continuous recording time is for analog inputs when the volume level is set to “VOL
0”.
The continuous play time shows the value when the volume level is set to “VOL 15”.
The above values are the standard values when the unit is charged and used at an
ambienttemperature of
The operating time when using an alkaline battery may be different, depending on the
type and manufacturer of the battery, and on the operating temperature.
Input sensitivity:
Recording level Reference input level Input impedance
Output level:
Dimensions:
Weight:
Input jack:
Output jack:
n
MiniDisc Recorder
Type:
Signal readout:
Audio channels:
Frequency response:
Rotation speed:
Error correction:
Coding:
Recording method:
Sampling frequency:
Wow and flutter:
MIC H 0.25 mV
MIC L 2.5 mV
10 kohms
10 kohms
LINE
100 mV
20kohms
Width: 3-l/4” (82.5 mm)
Height: 13/16” (20.7 mm)
Depth: 3-l/16” (77.9 mm)
0.39 Ibs. (177 g
)
with rechargeable battery
Line/optical digital, microphone (powered by the main unit)
Headphones (impedance: 19 ohms)/remote control unit
Portable MiniDisc recorder
Non-contact, 3-beam semi-conductor laser pick-up
Stereo 2 channels/monaural (long-play mode) 1 channel
20 - 20,000 Hz (+/- 3 dB)
Approx. 400 -- 900 rpm.
ACIRC (Advanced Cross Interleave Reed-Solomon Code)
ATRAC (Adaptive Transform Acoustic Coding), 24-bit
computed type
Magnetic modulation overwrite method
44.1 kHz (32 kHz and 48 kHz signals are converted to
44.1 kHz, and then recorded.
Unmeasurable (less than +/-O. 01% W. peak)
41