Sharp MD-MT821 User Manual

Page 24

n APSS

(Auto Proaram Search system

APSS automatically locates the beginning
of any track.

To move to the beginning of the

next track:

Move the shuttle switch tom during play-
back.

To re-start the track being played:

Move the shuttle switch to

during play-

back.

To skip a number of tracks at one time,

move the shuttle switch to

re-

peatedly until the desired track number is

shown.

To begin playback at a desired track, move
the shuttle switch to

while in the

stop mode to select the track number. Then

press the

button.

Note:

When the first track is selected and the

shuttle switch is moved to

the last

track on the disc will be located. When
the last track is selected and the shuttle
switch is moved to

the first track

will be located.

Cue and review

Load a

and begin playback.

2 Move and hold the shuttle switch at

for audible fast forward, or move and

hold the shuttle switch at

for audible

fast reverse.

Normal playback will resume when the
shuttle switch

is released.

Notes:

When the end of the last track is reached

during fast forward, the unit will enter the
pause mode. When the beginning of the
first track is reached during fast reverse,
the unit will enter the playback mode.

When the unit is in the all track repeat

mode, the search will wrap around from

the last track to the first, or vice versa.

Depending on the contents recorded on

a MiniDisc, some sounds may be
skipped while cueing and reviewing.

To search very quickly:

When fast forward or fast reverse is used
while in the pause mode, the search will be

performed more quickly than during audible

fast forward or fast reverse playback.

In this mode, no sound is heard. There-

fore, you should refer to the time dis-

play.

When you lift your finger, the unit will re-

enter the pause mode.