Sharp MD-MT821 User Manual

Page 38

Many potential “problems” can be resolved by the owner without calling a service techni-

cian.

If something seems to be wrong with this product, check the following before calling your

authorized SHARP dealer or service center.

PROBLEM

CAUSE

Is the AC adaptor disconnected?

The unit does not turn

Is the battery exhausted?
Is the unit in the hold mode?

on.

Has condensation formed inside the unit?
Is the unit being influenced by mechanical shock or by

static electricity?

Is the volume set too low?

No sound is heard from

Is the remote control unit or the headphones plugged in?

the headphones.

Are you trying to play a

with data on it instead of

containing music?

When the operation

Is the unit in the hold mode?

buttons are pressed, the

Is the battery exhausted?

unit does not respond.

Is the remote control unit plug or the headphone plug

inserted firmly?

Some sounds are

Is the battery exhausted?

skipped.

Is the unit being subjected to excessive vibration?

The

cannot be

Has the track number or character information been

ejected.

written on the disc yet?

Is the unit in the recording or editing mode?

Is the

protected against accidental erasure?

Is the unit connected properly to the other equipment?

Recording and editing

Is the AC adaptor unplugged or did a power failure

are impossible.

occur while recording or editing?

Is the unit in the hold mode?

Is an optical signal being output from the external

equipment?

Read the operation manual for the external equipment.

When this product is subjected to stron

4. Plug the AC adaptor back into the AC

external interference (mechanical shock

outlet and retry the operation.

excessive static electricity, abnormal sup-
ply voltage due to lightning, etc.) or if it is

operated incorrectly, it may malfunction. If

If strange sounds, smell or smoke come out

such a problem occurs, do the following:

of the unit or an object is dropped into the

Unplug the AC adaptor from the AC out-

unit, remove the AC adaptor from the AC
outlet immediatelv and contact a

2.
3.

let.

authorised SHARP service center.

Remove the battery.
Leave the unit completely unpowered for
approximately 30 seconds.

3 7