Sharp MD-MT821 - Manual (Page 20)

When recording, track numbers will be created automatically.
(Auto marker function/Synchro marker function)
When recording from analog inputs:
(Including digital inputs other than
CDs or MiniDiscs)
A new track number will automatically be
created whenever 1 second or more of si-
lence occurs in the source.
(Auto marker function)
If there is some noise in the “silent”
spaces from the source, the track num-
bers may not be created at the correct
position, depending on the contents of
the source being recorded.
You can also record a series of tracks
without using the auto marker function.
When recording from digital inputs:
(CDs/MiniDiscs only)
Track numbers will be created automatically
for each track at the same point where track
numbers already exist on the CD or
MiniDisc.
(Synchro marker function)
First track Second track Third track
TrackA T r a c k B
First track Second track Third track
Track A Track B Track C
The track numbers on the playbackside
may not match the track numbers re-
corded on the MiniDisc.
When recording, if a programed play-
back is performed by the source or play-
back is performed by selecting tracks
manually, the MiniDisc track numbers
may not be the same as on the source.
The track numbers can also be changed
after recording.
Track numbers may not be created,
even when recording from digital inputs,
depending on the CD player used for the
source.
19