Sharp MD-MT821 - Manual (Page 30)

5
When the letter you want is displayed,
press the ENTER/SYNC button.
To enter more letters in the name, re-
peat steps 3 - 5.
6
When the disc name has been com-
pletely entered, press the EDIT button.
If an incorrect letter is entered:
To erase a character:
Press the VOL + or VOL button to move
the cursor to the character you want to
erase, and then press the BASS button.
To enter a space:
Press the VOL + button to move the cursor
to the right.
Track name
Up to 100 characters can be entered for
each name.
1
Play the track which you want to name,
and press the
button.
The unit will enter the pause mode.
2 Press the EDIT button to select ‘TRACK
NAME”.
Track number that you
want to give a track name
3
Press the ENTEWSYNC button.
The unit will enter the character input
mode.
To cancel the operation, press the
button.
4
Perform steps 3 - 5 in the “Disc name”
section.
5 When the track name is completely en-
tered, press the EDIT button again.
Type of Characters
characters (They are selected using the REC LEVEL shuttle switch.)
indicates a space. ___
29