Sharp MD-MT821 User Manual

Page 15

When a sound, such as a person speak-

ing, is picked up by the microphone, re-

cording will begin automatically.

If a silence lasts for 3 seconds or

more, the recording will be paused au-

tomatically. However, the unit will not

pause for about the first 10 seconds

after recording has started.

To interrupt a synchro recording:

Press the

button while recording.

The Mic synchro recording mode will be

canceled, and the unit will enter the re-
cording stand-by mode.

To resume synchro recording, press the

ENTER/SYNC button again.

To stop recording:

Press the

button.

Recording from the microphone

(Mic manual recording)

You can start recording manually (any-

time you like).

Put the unit in the recording stand-by

mode. (Perform steps 1 4 in the “Mic

synchro recording” section.)

Press the

button.

Recording will start.

To interrupt a recording:

Press the

button while recording.

The unit will enter the recording stand-

by mode.

To resume recording, press the

but-

ton again.

The track number will be increased by

one each time you interrupt a record-

ing.

To stop recording:

Press the

button.

Notes:

If you want to use a microphone, be sure it is a plug-in-power type microphone.

When a plug-in-powertype microphone is plugged in, the main unit will provide power

for the microphone’s operation.

If a different type of microphone is plugged in, it may not operate properly or it may

cause the unit to malfunction.

Insert the plug firmly. If you don’t, the recording will not be made properly.
Use a microphone with a 1/8”(3.5 mm) diameter stereo mini plug.

While making a mic recording, do not connect anything to the LINE IN jack on the main

unit.