Sony Portable MD Recorder MZ-RH710 - Manual (Page 47)

model name1[MZ-RH710] model name2[MZ------]
[2-593-568-11(2)]
masterpage:Right
filename[E:\SONY
PA\5252_RH710\REVISE\DATA\J9050645_2593568112RH710_GB\2593568112\01GB
-MZ-RH710EE\04GB0OPE.fm]
47
Assigning tracks or
groups as a new group
(Group Set)
With this function, you can assign
existing tracks or groups to a new group,
and also you can assign a track that
currently belongs to no group to an
existing group.
You can create a maximum of 255 groups
on a disc used in Hi-MD mode and 99
groups on a disc used in MD mode.
Registration of non-consecutive tracks is
not possible (for example, track 3 and
tracks 7 and 8 cannot be assigned to a new
group).
It is not possible to make a new group if
the first track or last track of the group has
been selected from the middle of an
existing group.
Track numbers appear according to their
order on the disc, not their order within
the group.
• When the total number of characters in the
titles on a disc exceed the maximum that can
be input:
—If the disc is being used in Hi-MD mode,
you can make a group setting, but cannot
add a group name in step 4.
—If the disc is being used in MD mode, you
cannot make a group setting.
• The tracks or groups must be sequential. If the
desired tracks or groups are not consecutive,
you must move them to make them
consecutive before you can assign them
(“Moving recorded tracks or groups (Move)”,
page 49).
1
Enter the menu and select “Edit” -
“
: Set”.
2
Turn the jog dial until the number of
the desired first track appears in the
display, and then press NENT to
enter.
This selects the first track of a new
group. If the disc contains groups,
only the first track number of each
group is displayed.
1 2 4 5 6 7 8 9 101112 3
1 2 4 5 6 9 101112 3 7 8
Group 1 Group 2
Group 2 Group 1
Assigning tracks 1 to 3 to a new
group
Assigning group 1 and group 2 to a
new group
Track number
Disc
Disc
Notes
5-way control key (NENT)
MENU
Jog dial
x
continued
020REG.book Page 47 Tuesday, April 12, 2005 11:18 AM