Sharp MD-X8 - Manual (Page 9)

8
DISPLAY SECTION
WWW 3 F O R E V E R WWWWWWWW
WWW 2 W A V E WWWWWWWWWWWW
WWW 1 L O V E S O N G WWWWWWW
B E S T H I T S WWWWWWW
T O T A L M D 1 2 WWW 5 5 : 0 8
M D WWW 1 2 WWW 5 5 : 0 8 W T O T A L
B E S T W H I T S
Lighten
Darken
Lighten Darken
Standard character display
Extra large character display
DISPLAY
MULTI CONTROL
M I N . WWWWWWWWWWWWW M A X .
WWWWWWWWWWWWWWWWWWWWW
WWWWWWWWWWWWWWWWWWWWW
WWW C O N T R A S T W A D J U S T WWW
DISPLAY
H H H H H
To change the contrast of the display
1 Turn the power on, and hold down the DISPLAY button for
more than 0.5 seconds.
2 Press the MULTI CONTROL button to change the contrast.
I
The contrast is adjustable in 16 steps.
I
If no operation is performed for 10 seconds or more, the unit will return
to the original screen.
I
If you operate your personal computer using a separately available
sound card, you cannot adjust the contrast.
H H H H H
Character display
You can select a standard character display or an extra large
character display for the display on this product.
I
Standard character display
The default display mode set at the factory.
Track names are displayed on 4 lines so that you can check several
track names at the same time.
I
Extra large character display
When track names are displayed using extra large characters, you
can read the names at a distance.
H H H H H
To change the size of the characters
(extra large character display)
Turn the power on while the MD is in the stop mode, and press
the DISPLAY button.
I
If the DISPLAY button is pressed again, the characters will return to
their original size.
*01-16 98.6.23, 10:29 AM 8