Sharp MD-X8 - Manual (Page 13)

12
(Continued)
H H H H H
3D SURROUND
About 3D surround:
SRS is a breakthrough technology that creates 3-dimensional
sound by processing sound signals based on the human auditory
system. It produces real depth and localization of the sound
image which cannot be accomplished by ordinary stereo. SRS
only requires two speakers.
I
You can also adjust the sense of width or the sense of depth.
When the 3D SURROUND button on the main unit, or the
SURROUND ON/OFF button on the remote control is pressed,
the 3D SURROUND indicator will light and "3D SURROUND" will
be displayed on the LCD. When the button is pressed again, the
3D surround mode will be canceled.
H H H H H
Adjusting the sense of width or depth
Remote control operation
1 Press the WIDE/CENTER button in the 3D surround mode to
select "WIDE" or "CENTER".
2 When WIDE is selected:
When the + side on the VOLUME/3D SURROUND button is
pressed, the sound will grow wider. When the - side on the
VOLUME/3D SURROUND button is pressed, the sound width
will be reduced.
I
By adjusting the WIDE level, the apparent distance between the left
and the right speakers will seem to change. (The wider the setting, the
more distance there will seem to be between the speakers.)
When CENTER is selected:
When the + side on the VOLUME/3D SURROUND button is
pressed, the sense of depth will increase. When the - side on
the VOLUME/3D SURROUND button is pressed, the sense
of depth will decrease.
I
By adjusting the CENTER level, the sense of depth will change.
(The higher the center level, the greater the sense of depth.)
C E N T E R W I D E
W I D E C E N T E R
C E N T E R W I D E
3D SURROUND
indicator
3D SURROUND
S O U N D W R E T R I E V A L
3 D B S U R R O U N D
*01-16 98.6.23, 10:29 AM 12