Adjusting the digitizer – Sony CLIE PEG-TJ35 User Manual
Page 79
Customizing your CLIÉ™ handheld (Preferences)
79
Adjusting the Digitizer
You need to adjust the digitizer when performing a hard reset, when the tapping
operation or scrolling does not work properly, or when you cannot adjust the
brightness of the backlight or screen contrast.
1
Tap
V
at the top right of the Preferences screen, and select
[Digitizer].
The Digitizer calibration screen is displayed.
This Digitizer calibration screen is the same as the screen displayed when
the first time you turned on your CLIÉ handheld. Follow the on-screen
instructions to adjust the digitizer.
Tip
Use the stylus perpendicularly to the screen to tap targets.
This manual is related to the following products: