Performing the hotsync® operation via a network, Performing the hotsync, Operation – Sony CLIE PEG-TJ35 User Manual
Page 116: Via a network, Performing the hotsync® operation, Operation via a network
116
Exchanging and updating files/data using the HotSync
®
operation (Other HotSync
®
operations)
Performing the HotSync
®
operation via a
network
You can perform the HotSync
®
operation via a network between your CLIÉ
handheld and the computer in the LAN of your office, depending on the
network environment of your office. For details, contact the administrator of
the remote access server.
Prior to performing the HotSync
®
operation via a network
Check the following items:
• Both your company’s network system and its remote access server support
TCP/IP.
• You have a remote access account.
Preparing your computer
1
Click
in the Windows task tray (Notification area) at the
bottom right of the computer window and select [Network]
from the shortcut menu.
2
Click
in the Windows task tray (Notification area) at the
bottom right of the computer window once again and select
[Setup...] from the shortcut menu.
The
Setup
window is displayed.
3
Click [Network].
4
Click the check box next to the user name for the HotSync
operation.
Click [TCP/IP Settings...] and assign a subnet mask as needed. For details
on a subnet mask address, refer to the manual of your operating system or
contact the system administrator.
5
Click [OK].
To operate HotSync
®
operations via a network, you must have network
administrator skills.
Continued on next page
• • • • • • • • • • • • • • •