Sony CLIE PEG-TJ35 - Manual (Page 122)

122
Performing the HotSync
®
operation via LAN (LANSync)
Exchanging and updating files/data using the HotSync
®
operation (Other HotSync
®
operations)
6
Tap [OK].
The HotSync screen is displayed again.
Performing the LANSync operation
You can perform the LANSync operation when you have prepared your
computer settings, CLIÉ handheld settings, and Conduit Setup. Turn on the
computers and start
HotSync
®
Manager .
Note
To perform the LANSync operation, both the computer connected to your CLIÉ
handheld and the computer performing the HotSync
®
operation should be set for
LANSync. Also, click (HotSync) to display the shortcut menu in the Windows task
tray (Notification area) at the bottom right of the computer window on each computer
and make sure that [Network] in the shortcut menu is selected (If not, click [Network] to
select it).
1
Rotate the Jog Dial™ navigator to select (HotSync) on
the CLIE Launcher, and press the Jog Dial™ navigator.
The HotSync screen is displayed.
Tip
You can also tap (HotSync) to display the HotSync screen.
2
Tap (HotSync).
The HotSync
®
operation starts.
A message will be displayed when the HotSync
®
operation is complete.