beautypg.com

Beaming information, E 152) – Sony CLIE PEG-TJ35 User Manual

Page 152

background image

Beaming

152

Beaming between your CLIÉ handheld and another Palm OS

®

PDA

Beaming information

You can beam the data on your CLIÉ handheld to another Palm OS PDA
device that has an IR port.

1

Select the data, category, or business card you want to
beam.

2

Tap

(Menu).

The menu is displayed.

3

Tap one of the following:

• The Beam command for an individual record

• In Address only: Beam Business Card

• Beam Category

Tip

You can also perform [Beam Business Card] by pressing

(the

Address Book button) for about 2 seconds.

4

When the Beam dialog box is displayed, point the IR port of
your CLIÉ handheld directly to the IR port of another Palm
OS PDA device.

The

Beam

dialog box shows that the transfer is complete.

Tip

For best performance of the data exchange, keep 4 to 8 inches (approximately 10 to
20 centimeters) between your CLIÉ handheld and the other Palm OS PDA device.
Do not place any obstacle between the devices. The optimum distance for beaming
may vary depending on devices.

Location of the IR port may vary
depending on your model.

Continued on next page

• • • • • • • • • • • • • • •

This manual is related to the following products: