Danger – Sundance Spas ALTAMAR 880 User Manual

Page 60

Page 54

880 SERIES

TO deCreASe riSk OF deATH, drOWNiNG, Or eNTrAPMeNT,

ALWAYS TUrN POWer TO THe HOT TUB OFF BeFOre reMOViNG

THe MiCrOCLeAN ULTrA FiLTer ASSeMBLY!
Filter Cleaning/replacement Procedure:

dANGer:

TUrN POWer TO SPA OFF! TO de-

CreASe riSk OF deATH, drOWNiNG, Or eNTrAP-

MeNT, NeVer OPerATe SPA WHeN FiLTer iS NOT

PrOPerLY iNSTALLed Or iF Weir ASSeMBLY iS

dAMAGed Or ALTered!

Filter Cleaning requirements:

Clean MicroClean Ultra Pleated

•

Filter (1) monthly and replace every

18 months (6473-165).

Rinse off MicroClean Ultra Insert (2)

•

monthly and replace every 6 months

or as needed (6473-164).

Filter removal instructions:

Loosen filter nut to provide clearance,

then remove MicroClean Ultra Filter

Assembly from spa.

Monthly Filter Cleaning Procedure

We recommend cleaning the outer pleated filter (1) with a high

pressure water nozzle and the filter insert (2) with a low-pressure

water nozzle monthly. Periodically, the outer pleated filter cartridge

(1) will require a more thorough cleaning to remove embedded oils

and minerals by using special spa filter cleaners offered by your spa

dealer. Always remove the center filter insert (2) before cleaning the

outer filter (1) with chemicals. Never use filter cleaners of any kind

on the filter insert (2) or it may be damaged, come apart or allow

impurities to re-enter the water, increasing the risk of contracting

a waterborne illness (e.g. an infection, bacteria or virus) and/or

respiratory ailments.

Procedure:

1. Grasp center filter insert end cap (2) in hand and pull outward from

pleated cartridge (1). If filter insert (2) is 6 months old, throw it away

and purchase new one. DO NOT install new insert at this time.

Filter Nut