Sundance Spas ALTAMAR 880 - Manual (Page 21)

Page 15
880 SERIES
7.0 Maxxus Power requirements
Sundance ® hot tubs are designed to provide optimum
performance and flexibility of use when connected to their
maximum electrical service. However, they are shipped
factory configured for their most common preferred
electrical connection as follows:
• North American 60 Hz Model: 240 VAC/60A
If you prefer, a qualified technician can perform a minor circuit board
modification that allows the hot tub to operate on a different electrical
service (see table below).
North American 60 Hz Maxxus
240V/50A* 240V/60A**
Voltage 240 VAC 240 VAC
Max. Current Draw 38A 48A
Number of Wires 3 3
Circuit Breaker (2-Pole) 50A* 60A**
* In this configuration, the heater will not operate while any two jets
pumps are running.
** In this configuration the heater will operate while any two jets pumps
and the blower are running but will not operate when all three jets
pumps are running.