Sanyo PLC-XM100L - Manual (Page 18)

PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications
18/28
6.37 INPUT 3 S-VIDEO Command
Command “C34” [CR]
Detail
Select S-Video input in Input 3.
Although projector returns “OK”, Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.38 INPUT 3 Y,Pb/Cb,Pr/Cr Command
Command “C35” [CR]
Detail
Select Y,Pb/Cb,Pr/Cr input in Input 3.
Although projector returns “OK”, Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.39 POINTER RIGHT Command
Command “C3A” [CR]
Detail
Move the Pointer of On-Screen Display Menu to the right.
This command works differently from the command by Point button “>” of the
projector or remote control and has no “Volume +” function.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.40 POINTER LEFT Command
Command “C3B” [CR]
Detail
Move the Pointer of On-Screen Display Menu to the left
This command works differently from the command by Point button “<” of the
projector or remote control and has no “Volume -” function.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.41 POINTER UP Command
Command “C3C” [CR]
Detail
Move up the Pointer of On-Screen Display Menu
This command works the same way as “▲” button of the projector or remote
control.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]