Sanyo PLC-XM100L - Manual (Page 16)

PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications
16/28
6.25 INPUT 2 VIDEO Command
Command “C23” [CR]
Detail
Select Video input in Input 2.
Although projector returns “OK”, Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.26 INPUT 2 Y,Pb/Cb,Pr/Cr Command
Command “C24” [CR]
Detail
Select Y,Pb/Cb,Pr/Cr input in Input 2.
Although projector returns “OK”, Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.27 INPUT 2 RGB Command
Command “C25” [CR]
Detail
Select RGB input in Input 2.
Although projector returns “OK”, Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.28 IMAGE Command
Command “C27” [CR]
Detail Switch Image Setting status
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.29 ON START SET Command
Command “C28” [CR]
Detail
Enable Power ON Start
This status is stored in EEPROM and retained regardless of Power OFF/ON
operation.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]
6.30 ON START CANCEL Command
Command “C29” [CR]
Detail
Disable Power ON Start
This status is stored in EEPROM and retained regardless of Power OFF/ON
operation.
Acceptable [ACK] [CR]
Response
Unacceptable “?” [CR]