Siemens SANTIS-ab - Manual (Page 8)

8
4. Configuration
• There are only parameters for the a/b-interfaces. Thus there is
only a need for a configuration, if the a/b-interfaces are
available (NT+2ab mode and Pairgain mode; see chapter 2).
The configuration remains stored, even after a power failure.
• The configuration is done by means of an analog telephone
set equipped with tone dialing, having both
∗
and
#
keys.
Remark:
In normal use SANTIS-ab recognizes both pulse and tone
dialing.
• If the NT+2ab mode is selected, all the configuration
commands can be set from both the a/b-interfaces without
any restrictions.