Siemens SANTIS-ab - Manual (Page 19)

19
Metering Pulse Switch
Command-No / Meaning
Parameter value Default
331 Metering pulses at
a/b1-interface
0 = off
1 = on 1
332 Metering pulses at
a/b2-interface
0 = off
1 = on 1
Some terminal equipments (e.g. modems) do not work correctly,
if metering pulses are sent. Thus it is possible to switch them off.
Restrictions for NT+2ab/CA restr. and Pairgain:
a/b1 via a/b1 only; a/b2 via a/b2 only.