SMC Networks ADSL Barricade SMC7204BRA - Manual (Page 36)

Committing Changes and Rebooting
31
You can commit changes to save them permanently to a flash
memory.
Note: Submitting changes activates them immediately, but
saves them only until the device is reset or powered
down. Committing changes saves them permanently.
Follow these steps to commit changes.
1. Click the [Admin] tab, and then click [Commit & Reboot]
in the task bar. The [Commit & Reboot] page appears.
Figure 6. Commit & Reboot Page
2. Click [Commit]. Disregard the selection in the [Reboot Mode:]
drop-down list; it does not affect the commit process. These
changes are saved to a permanent storage. The previous
settings are copied to a backup storage so that they can
be recalled if your new settings do not work properly
(see the below rebooting instructions).
Rebooting the device using Configuration Manager
To reboot the device, display the [Commit & Reboot] page, select
the appropriate [Reboot Mode:] from the drop-down list, and then
click [Reboot].
You have three options when rebooting.