Sanyo VPC-MZ3EX - Manual (Page 200)

Problem Cause Action
Reference
page
Viewing
images
The image is too
dark. The flash was
blocked by a
finger or other
object. Hold the digital
camera
correctly, and
make sure the
flash is not
obstructed.
55
The subject was
too far away. Capture the
image in the
range of
operation of the
flash.
75
The subject was
lit from behind. Use the forced
flash mode.
73
Use the
exposure
correction
function.
124
There is not
enough light. Adjust the
shutter speed.
110
Adjust the ISO
sensitivity
setting.
109
The image is too
bright. The forced flash
mode is
selected. Select a
different flash
mode.
73
The subject was
too bright. Change the
angle of the
digital camera.
—
Use the
exposure
correction
function.
124
TROUBLESHOOTING
SX612/EX, GX, U (VPC-MZ3 GB2) Thu. Sept., 05/2002
197
English