Sanyo VPC-MZ3EX - Manual (Page 118)

ADJUSTING THE COLOR TONES (REAL-COLOR EQUALIZER)
4
Adjust the color.
1
Press [ j ] or [ l ] on the arrow button
to select a color icon (
í
to
Í
)
to adjust.
2
Press [ d ] or [ c ] to select the color
property you wish to change (hue,
saturation or brightness).
3 Press [ j ] or [ l ] to adjust the value
of the selected color property.
œ Adjust the hue while watching on
the LCD monitor.
œ Each property can be set within a
maximum range of +50 to –50.
4
Press the SET button.
œ To change the settings for other
colors, press [
j ] or [ l ] to select
another color, and then repeat
steps
2
to
4
.
5
Select the ù icon, and press the
SET button.
œ The screen to input a title appears.
œ If you are correcting a color that was
previously corrected, the set name
will appear.
œ A maximum of 10 characters can be
input for the title. (For entering text,
please follow procedures 6 through
8 on pages 132 and 133.)
p 00 00 00
HUE SAT BR
SELECT
SETTING
The characters to the left and
right of the hue setting value
indicate the color change. In this
example, the indicated setting
changes magenta to red hues
(
ü ).
When set to a – value, magenta
changes to blue hues (
Í ).
Initial color
Adjusted color
1
A B C D E
INPUT SETTING TITLE
<
SCROLL
SELECT
SX612/EX, GX, U (VPC-MZ3 GB2) Thu. Sept., 05/2002
115
English