Sanyo VPC-MZ3EX - Manual (Page 174)

SETTING THE DATE AND TIME
NOTE
œ
If the date and time are not set, September 1, 2002 midnight is recorded as
the date and time. Consequently, “2002/09/01 00:00” appears during
playback.
œ Under normal conditions, while the battery pack is being replaced, an
internal battery will maintain the date and time settings. However, there is a
small chance the settings may be lost. (The backup will last for approx. 7
days.) It is recommended to check that the date and time settings are still
correct after replacing the battery pack and before shooting or recording of
any type (follow steps 1 and 2).
To correct the date and time settings.
œ
After steps 1 and 2, press [
l
] on the arrow button to select the line of the
setting that you want to change, and press [ c ] to select that setting. Then
press [
j
] or [
l
] to set the new setting.
SX612/EX, GX, U (VPC-MZ3 GB2) Thu. Sept., 05/2002
171
English