Sony 500WSPL - Manual (Page 41)

Chapter 2 Fitting and Connections
Chapter 2 Fitting and Connections
41
Using the Optional RM-VJ1
Remote Control Unit (Equipped
With Microphone And Monitor)
You can control the camcorder while watching the
image on the LCD screen of the Remote Control Unit
if you connect the RM-VJ1 Remote Control Unit to the
camcorder.
Note
Be sure to use the CCA-7-7A Cable only when
connecting the RM-VJ1.
When using lens designed for the power
zoom and focus
Use the following lens when controlling the zoom and
focus from the RM-VJ1:
Fujinon: A19X8.7 BRD-S28
A19X8.7 BERD-S28 (with the extender)
A19X8.7 BRRD-S28 (with the ratio
converter)
Canon: YJ18X9B KAS-SS12
YJ18X9B IAS-SS12 (with the extender)
For details on these lens or other lens designated for
the power zoom and focus, consult Fujinon or Canon
dealer.
DSR-500WSL/500WSPL
REMOTE 2
CCA-7-7A cable
The connection for controlling the zoom when using conventional lens
RM-VJ1
Remote
control unit
(equipped
with
microphone
and monitor) Remote control connector
(8-pin) for controlling the
zoom on the bottom of the
lens grip
RM-VJ1 Remote
control unit (equipped
with microphone and
monitor)
REMOTE1
When using conventional lens
When using conventional lens, such as VCL-918BY,
you can control the zoom if you use the optional lens
cable (Sony product number: 1-790-779-11). For
details on the cable, consult your Sony dealer.
REMOTE2
Lens cable
(1-790-779-11)