beautypg.com

Menu 210 using auto-check function, Using auto-check function – Sony 500WSPL User Manual

Page 107

background image

Chapter 5

Adjustments and Settings

107

Chapter 5 Adjustments and Settings

Example: 8 minutes

If the setting does not need to be changed, press
the MENU button to close the menu.

2

Press the SHIFT button until the standby-on period
starts blinking, then press the ADVANCE button.

Each press of the ADVANCE button changes the
setting as follows.
08 (factory setting)

t 01 t 03 t 05

3

Press the RESET/(MENU SET) button and then
the MENU button.

The settings are recorded and the display window
returns to the display shown before the VCR menu.

Menu 210

Using Auto-Check

Function

On the DSR-500WSL/500WSPL, the internal check
can be automatically performed using the auto-check
function. Meanwhile, a test recording and playback are
also performed for about one minute.
Before shooting, it is desirable to perform auto-check
and make sure for problems in VCR’s internal
operations through the result of the internal check
displayed in the display window and the video and
audio recording qualities.

Preparations for testing

Make preparations as shown in the table below.

To perform the auto-check

1

Display menu 210.

2

Press the SHIFT button to make the auto-check
function indication (oFF) start blinking, then press
the ADVANCE button to change the indication to
“on”.

To cancel the auto-check function, press the
MENU button to close the menu.

3

Press the RESET/(MENU SET) button.

This changes the display and opens the cassette
holder. If there is a cassette in the holder, it is
ejected (except during recording).

4

Insert the cassette and close the cassette holder.

The display changes to the following, and the tape
is loaded.

5

Use the tape transport buttons to change the tape
position for test recording if necessary, or advance
to step

6

.

Blinking

Blinking

(Continued)

Blinking

Auto-check function
indication

Blinking

Standby-on period

Preparation

Refer to

Connect a monitor to the MONITOR OUT or S
VIDEO OUT connector

Page 25

Connect an earphone or headphones to the
EARPHONE connector

Page 15

Prepare a cassette for test recording/playback

Page 53

207 08

210 oFF

At EJECT n At C-In

At rEC