Sony 500WSPL - Manual (Page 32)

Chapter 2 Fitting and Connections
32
Chapter 2 Fitting and Connections
Fitting the Lens
Retaining rubber
Lens mount cap
Lens fixing lever
Align and push in.
Note
Be sure to turn off the power before fitting the lens.
1
Remove the retaining rubber
which prevents the lens mount
from coming loose, then raise
the lens fixing lever, and
remove the lens mount cap.
2
With the lens fixing lever
turned fully counterclockwise,
push in the lens, aligning the
projection on the lens with the
cutout on the camcorder.
3
Supporting the lens, turn the
lens fixing lever fully
clockwise. Replace the
retaining rubber on the lens
mount.