Samson Trovis 5100 - Manual (Page 15)

1.6.1 Copying the times-of-use
The times-of-use of heating circuit 1 (2) can be copied and used for heating circuit 2 (3).
Copy function Parameter level Icon
HK1 –> HK2 PA1 COPY2
HK2 –> HK3 PA2 COPY3
Proceed as follows:
Switch to configuration and parameter level.
Display: PA1
Select parameter level.
Open parameter level.
Select “COPY_“ data point.
Open copy program.
The display blinks.
Copy the times-of-use.
Select End on the display.
Exit the parameter level.
Return to the operating level.
EB 5179 EN
15
Operation