Adding a displayed number to the directory, Copying a number from the directory, Last number redial list – Siemens C450 User Manual
Page 14: Dialling from the last number redial list, Managing entries in the last number redial list, Opening lists with the message key, Calls list, Opening callslist, List entry
13
Using the directory and lists
Gigaset C 450 / IM-Nord EN / A31008-M1706-R201-1-7619 / directories_charges.fm / 27.7.05
Please remember:
u
Entries with identical numbers are not over-
written in the receiving handset.
u
The transfer is cancelled if the phone rings
or if the memory of the receiving handset is
full.
Adding a displayed number to the
directory
You can copy to the directory any numbers that
appear in a list, e.g. the calls list or the last
number redial list.
A number is displayed.
§Menu§
¢
Copy to Directory
¤
Complete the entry (page 12).
Copying a number from the directory
You can open the directory in many operating
situations e.g. to transfer a number. Your hand-
set need not be in idle status.
s
Open the directory.
q
Select entry (page 12).
Last number redial list
The last number redial list contains the ten
numbers last dialled with the handset (max. 32
numbers). If one of the numbers is in the direc-
tory, then the corresponding name will be dis-
played.
Dialling from the last number redial list
c
Press the key briefly.
q
Select an entry.
c
Press the talk key again. The
number is dialled.
Managing entries in the last number redial
list
c
Press the key briefly.
q
Select an entry.
§Menu§
Press the display key.
The following functions can be selected with
q
:
Use Number
(as in the directory, page 12)
Copy to Directory
Copy an entry to the directory (page 13).
Delete Entry
(as in the directory, page 12)
Delete List
(as in the directory, page 12)
Opening lists with the message key
You can use the message key
f
to open the fol-
lowing lists:
u
SMS list
u
Network mailbox
If your network provider supports this func-
tion and the network mailbox is configured
for fast access (page 19).
u
Calls list
An advisory tone sounds as soon as a new
entry appears on a list. The key
f
flashes. A
message appears in the display.
When you press the flashing key
f
, you will
see all the lists that contain new messages. If
only one list contains new messages, this will
be opened automatically.
Calls list
Requirement: CLIP (page 9)
The numbers of the last 10 missed calls are
stored. Multiple calls from the same number
are only stored once (the last call).
The calls list is displayed as follows:
Number of new entries + number of old, read entries
Opening callslist
f
¢
Calls List: 01+02
q
Select entry.
The last incoming call is displayed in the calls
list.
List entry
Example of a list entry:
Note:
If calls are stored in the network mailbox you will
receive a message if the appropriate settings have
been made (see the network mailbox instructions of
your network provider).
Calls List: 01+02
New Call
01/02
1234567890
11.11.05
19:27
§Back§
U
§Menu